Brands |
N/A Autonics USA |
Direct Current (DC) Voltage |
N/A 5 to 24 V |
Sensing Type |
N/A Through Beam |
Sensing Distance |
N/A 5 mm |
Sensing Target |
N/A Opaque |
Light Source |
N/A Infrared Light Emitting Diode (LED) |
Maximum Light ON Response Time |
N/A 20 µs |
Maximum Dark ON Response Time |
N/A 100 µs |
Tolerance (±) |
N/A 10 % |
Maximum P to P Ripple Factor |
N/A 10 % |
Maximum Current Consumption |
N/A 15 mA |
Operation Mode |
N/A Dark On (Set by Control wire) Light On |
Control Output |
N/A Negative Positive Negative (NPN) Open Collector |
Connection Type |
N/A Diameter 2.5 mm, 4-wire, 1m |
Maximum Environment Ambient Illumination (Fluorescent Lamp Received Illumination) |
N/A 1000 lx |
Environment Ambient Temperature |
N/A -20 to 55 ºC |
Environment Ambient Storage Temperature |
N/A -25 to 85 ºC |
Protection Structure |
N/A Ingress Protection (IP) 50 (International Electrotechnical Commission (IEC) Standard) |
Approval |
N/A European Conformity (CE) |
Environment Ambient Relative Humidity (RH) |
N/A 35 to 85 % |
Environment Storage Ambient Relative Humidity (RH) |
N/A 35 to 85 % |
Case Material |
N/A Polybutylene Terephthalate (PBT) |
Sensing Part Material |
N/A Polycarbonates (PC) |
Minimum Sensing Target |
N/A ≥ 0.8 mm × 1.8 mm |
Hysteresis (Distance) |
N/A ≤ 0.05 mm |
Response Frequency |
N/A 2 kHz |
Peak Emission Wavelength |
N/A 940 nm |
Indicator |
N/A Operation Indicator (Red LED) |
Direct Current (DC) Load Voltage |
N/A ≤ 24 V |
Maximum Load Current |
N/A 50 mA |
Residual Voltage |
N/A NPN: ≤ 1.2VDC PNP: ≤ 1.2VDC |
Protection Circuit |
N/A Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit |
Insulation Resistance |
N/A ≥ 20 Mohm (250 VDC, megger) |
Noise Immunity |
N/A The square wave noise (pulse width: 1µs) by the noise simulator ±240VDC |
Dielectric Strength |
N/A 1,000VAC 50/60Hz for 1 minute |
Vibration |
N/A 1.5 mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours |
Shock |
N/A 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times |
Connection |
N/A Cable type |
Core |
N/A AWG28 (0.08 mm), 19-core, insulator out diameter: 0.65 mm |
Approximate Weight |
N/A 50 g |
