Item # PRFAT30-10DO-V, 10 Meter (m) Sensing Distance Proximity Sensor On Advance Electrical & Automation

Unit of Measure

Specifications | Note

Brands	N/A Autonics USA
Installation	N/A Shield (Flush)
Sensing Distance	N/A 10 mm
Control Output	N/A Normally Open
Sensing Side Diameter	N/A 30 mm
Standard Sensing Target	N/A 54 x 54 x 1 mm
Standard Sensing Material	N/A Iron
Maximum Leakage Current	N/A 0.8 mA
Material	N/A SUS303
Standard Cable Material	N/A Oil resistant cable
Protection Structure	N/A Ingress Protection (IP) 67
Approval	N/A Canadian and US Standards by Underwriters' Laboratories (CULUS) Eurasian Conformity (EAC) European Conformity (CE)
Body Type	N/A Standard Type
Environment Ambient Temperature	N/A -25 to 70 ºC
Environment Storage Temperature	N/A -30 to 80 ºC
Environment Ambient Relative Humidity (RH)	N/A 35 to 95 %
Environment Storage Relative Humidity (RH)	N/A 35 to 95 %
Maximum Sensing Distance Hysteresis	N/A 15 %
Maximum Residual Voltage	N/A 3.5 V
Shipping Weight	N/A 225 g
Unit Weight	N/A 170 g
Weight	N/A 0.2 lb
Response Frequency	N/A 50 Hz

N/A

When using the nut which is not SUS303 material such as brass, the sensing distance is variable.
The response frequency is the average value. The standard sensing target is used and the width is set as 2 times of the standard sensing target, 1/2 of the sensing distance for the distance.
Option is 5m.
The weight includes packaging. The weight in parenthesis is for unit only.
The temperature or humidity mentioned in Environment indicates a non freezing or condensation.

Brands